PRODUCT: REPLACEABLE SPLINE BIT SCREWDRIVERS
DRIVERS
|
SD-048-4 - WITH .048-4 BIT X 3.00" SD-048-6 - WITH .048-6 BIT X 3.00" SD-060-6 - WITH .060-6 BIT X 3.00" SD-069-4 - WITH .069-4 BIT X 3.00" SD-072-6 - WITH .072-6 BIT X 3.00" SD-076-4 - WITH .076-4 BIT X 3.00" |
SD-111-6 - WITH .111-6 BIT X 3.00" SD-133-6 - WITH .133-6 BIT X 3.00" SD-145-6 - WITH .145-6 BIT X 3.00" SD-168-6 - WITH .168-6 BIT X 3.00" SD-183-6 - WITH .183-6 BIT X 3.00" |
SETS
SDK-4 - SET OF 8 - CONTAINING ONE
(1) EACH SD-048-6; SD-060-6; SD-072-6; SD-096-6; SD-111-6; SD-133-6; SD-145-6;
AND SD-168-6 IN POUCH
SDK-5 - SET OF 5 - CONTAINING ONE
(1) EACH SD-033-4; SD-048-4; SD-069-4 AND SD-076-4 IN POUCH
PRODUCT CHARACTERISTICS (ALL PART NUMBERS):
HANDLES - EXTRUDED ONE PIECE CELLULOSE ACETATE
POLYMER 3/4" DIAMETER X 4.00" LENGTH 4 FLUTE AMBER COLOR.
BIT HOLDERS - CASE HARDENED 1011 COLD ROLLED STEEL.
BLACK OXIDE FINISH. BIT HOLE IS MACHINED TO THREE DIFFERENT DIAMETERS
TO ALLOW FOR BIT SIZE BROACHING, BEARING WALL AND CLEARANCE. KNURLED
AND PRESS FIT INTO HANDLE. HOLDER IS TAPPED FOR 6-40 SET SCREW ACCEPTING
1/16" HEX KEY TO ALLOW FOR ADJUSTMENT AND REPLACEMENT OF BIT.
BITS - AISI 8650 COLD DRAWN ANNEALED STEEL - HEX.
HEAT TREATED MINIMUM ROCKWELL C-48. BLACK OXIDE FINISH.
ADDITIONAL NOTES:
THE ABOVE TOOLS ARE MANUFACTURED IN ACCORDANCE WITH AND
MEET FEDERAL SPECIFICATION GGG-K-275-D, DATED 3/19/74 AND INTERIM AMENDMENT-1,
DATED 4/14/88
